JBF4061

Product Features
• Compatible with JB fire control panel via loop protocol.
• With 192 x 64 dot LCD screen; displays information in rich, clear and effective form.
• Report alarm information from loop devices, including local loop, other loops in same panel and from network panels.
• Automatically synchronize Time and date with the panel; no extra setting needed.
• During commissioning, only set the address number for repeat panel. The loop number and machine number can be automatically obtained from the control panel and displayed in the standby page, which gives clear location to the user.
• Alarm address settings are the same with auto-control program compiling, making commission quick and easy.
• Automatically identify the alarm type, only display fire alarm information. Automatically identify MCP and display the information from MCP.
• Fire hydrant button and module control information aren't displayed (can set the module as relay type if user wants to display information from module.
• With Chinese and English display switching function.
• Import Chinese address notes (the same of the control panel, no extra compile needed) directly from the U disk. The fire repeat panel identifies U-disk automatically.
• Four-wire connection; signal line is polarity-free and 24V power line distinguishing polarity. Low power consumption, communication distance 1500m; one loop can connect to up to 15 fire repeat panels.

Technical Data

Content	Technical parameters
Wiring	Four-wire connection; signal line is polarity-free and 24V power line distinguishing polarity.
Rated voltage	DC24V
Loop	DC18V-27V modulation type, connect to control panel
Working temperature	-10~+50℃
Storage temperature	-20~+55℃
Relative humidity	≤95%
Monitoring current	≤7mA（24V）
Alarm current	≤8mA（24V）
indicator	Fire (red), first alarm (red), MCP (red), fault (yellow), operation (green), silence (red);
dimensions	180mm×110mm×29mm
Addressing method	Operate from the panel with keypad
Addressing range	201-215
Weight	280g
Communication distance	1500m
Applied standard	GB17429-2011 “Fire Indicating Panel”

Wiring
1) First install the base to 86 embedded box.
2) Signal loop L1 and L2 connect to terminals L1, L2, polarity-free; Power line connect to terminals 24V, GND, distinguishing polarity; Signal line should adopt ZR-RVS-2×1.5mm²and power line NH-BV-2×2.5mm².
3) Mount the repeat panel onto the base.

Installation and dimensions

UL Fire Safety System

EN Fire Safety System

Automatic Fire Alarm System

Small-area Fire Safety System

Gaseous Suppression and Control System

Fire Door Monitoring System

Electrical Fire Monitoring System

Power Supply System for Fire Protection Equipment

Combustible Gas Detection and Alarm System

Wireless WAN Fire Safety System